PVC flooring has become very popular because it is a durable floor that can last very long and requires little maintenance. One Good PVC floor Can last around 15 to 30 years, depending on how thick your top layer is. Ultimately, however, it can happen that there are scratches on the floor or they even get worse. In case the top layer repair is not enough, you need to PVC shelf replacement , Or maybe you even want the whole Removing PVC floor . This is how you can do that best!
PVC floor replacement
You want to quickly and easily PVC floor repair When a board (or several) has been damaged? Then this is very fast and easy to do. You only need a number of things.
- Hair dryer or hot air gun
- PVC shelf
- Glue
- Detergent or a sander
Step 1: Heat up
Grab the hair dryer or hot air gun and start heating the floor area. This ensures that the glue loosens and makes it a lot easier to remove the shelf. Then you untie the shelf and pull it over.
Step 2: Glue scraps
An even floor is very important if you are going to install a PVC floor. The adhesive residues that remain after removing the boards can cause unevenness and must therefore be removed. The easiest way to remove this glue is by soaking detergent and water on it and then removing it. With strong glue, however, you may need a sander.
Step 3: Adhesives
Place new glue. Use the adhesive comb that you used when installing the PVC floor to spread the adhesive over the surface. This will ensure good adhesion of the shelf. It is best to choose a glue comb made for PVC flooring, because the depth of the teething of these combs is ideal for laying a PVC floor.
Step 4: New strips
Attach the new PVC floor board and make sure it sits correctly between the rest of the boards. Put something heavy on the shelf you just glued and let it dry for two hours. Then you can clean the floor again and it is ready for use again!
Click PVC floor re-laying
If you have damage in your Click PVC floor , Then of course the process is slightly different. It can be done in the same way as described above, but is often slightly more difficult. First, you can tape the floor board to make sure you have the right shelf. Then you can use a raid saw to make a few notches. Use connecting glue and insert the new shelf. Use weight to press the shelf well and let it dry. It is possible to replace any kind of click laminate in this way.
Re-laying a PVC floor yourself is not difficult!
Even though PVC floors generally last a long time, it can still be the case that a board is badly damaged by something heavy falling or something sharp. In this case, of course, you do not want to start reinstalling the entire floor. One of the great advantages of these PVC floors is that you therefore have the Strips Can individually loosen and place a new one.
Heat from a hair dryer or a hot air gun helps very much with making the glue soft. This ensures that you can loosen the floor a lot easier. You can also use this technique to remove the adhesive residue, but in some cases the glue can be too tight. In this case, a sander is needed to remove the glue and even the floor again.
Of course, it is possible to call in a specialist to repair your floor. However, this costs a lot of money, while often only one shelf needs to be replaced. However, it is quite easy to repair your PVC floor yourself. Especially if you still have a number of planks and some glue from installing the PVC floor, this is extra beneficial.
